making cbd

December 15, 2021 By admin Off

Depending on their strain, cannabis may contain large or relatively low amounts of CBD. When you make CBD oil, choose a strain with a high CBD content so that you can extract the most beneficial compounds into your homemade oil.

Rather than smoking, you can activate these compounds through other means of heating. Some people bake hemp flowers in a slow oven for about an hour or use a slow cooker. These methods are inexpensive, but they’re also imprecise and may not activate all the CBD.

Sacred Smoke Herbals sells high-CBD hemp flower that’s organically grown, lab-tested, and available in all 50 states. Use coupon code NOURISHED15 for 15% off.

Many people take CBD to help combat inflammation, anxiety, or restless sleep. Some research suggests it helps protect and support nervous system health (1) and may reduce pain (2), while other research suggests it supports gut health and proper immune system function (3).

To activate CBD efficiently and to get the most from your plant material, you’ll need a precision cooker (also known as a decarboxylator) that can maintain the exact temperatures needed for the full activation of CBD and other cannabinoids. With precision heating, decarboxylators extract a higher percentage of beneficial plant compounds than cruder methods and are a worthwhile investment for anyone who takes CBD oil regularly or wants to make a consistently good product.

High-CBD hemp flower.

Where to Find High-CBD hemp flower. Since hemp flower is non-intoxicating with negligible to no-detectable THC content, it is legal on a federal level. You may be able to find it locally; however, your best bet is to purchase it online.

Many people use CBD oil to reduce inflammation, soothe pain, or improve their body’s response to stress. And it’s super easy to make at home, too. Plus you can use healthy fats and you’ll know exactly what you’re putting into your bottle, avoiding the refined oils and additives that commercial producers sometimes add.

To make CBD oil at home, you’ll need to follow a simple two-step process: decarboxylation and infusion. While it sounds complex, decarboxylation is a simple process of precision heating that activates beneficial compounds in cannabis. The second step, infusion, releases those compounds into a carrier oil. Infused oils are easy to take, and oil makes these compounds easier for your body to absorb, too.

We used the Ardent Flex for making this CBD oil. With multiple settings, you can use it to activate CBD as well as similar compounds. And, you can also use it to make herbal infusions. Save $30 with code NOURISHED .

Where to Find a Decarboxylator . Commercial CBD oil producers use huge decarboxylators capable of activating the cannabinoids in several pounds of cannabis; however, if you’re making it at home, you’ll need a smaller version.

CBD oil is a non-intoxicating herbal remedy made from hemp flower, another is cannabis honey. It is rich in cannabidiol, a type of compound found in cannabis that has strong anti-inflammatory properties. One of CBD’s benefits is that it conveys the beneficial properties of cannabis without the high since it contains little to no THC.

To make CBD oil you only need two primary ingredients: hemp and a carrier oil. Hemp flowers that are high in CBD will yield the best results, and if you can’t find them locally, you can order them online. After decarboxylating the hemp flowers, you can then use them to make a CBD-infused oil.

In order to make CBD oil, you need to extract cannabidiol from hemp first. Further, you need to activate through a process called decarboxylation. The compounds in cannabis plants aren’t active or bioavailable on their own; rather, they’re activated through heat which is why the plant is traditionally smoked.

If you’re looking to make CBD oil, you’ll need just two ingredients: hemp and a carrier oil like olive oil. The result is a vibrantly herbaceous infused oil with soothing anti-inflammatory properties.

A carrier oil is an oil that you use for herbal infusions. Coconut oil and MCT oil (which is derived from coconut) are popular carrier oils both in commercial and homemade CBD products. Avoid highly refined, inflammatory oils such as vegetable oil, soybean oil, grapeseed oil, and corn oil.

Activating the CBD.

What you’ll need to make CBD oil.

Cannabis oil is made by lightly heating (and thus infusing) cannabis in a “carrier oil”. Cannabinoids like CBD and THC, the most active components in cannabis, are both hydrophobic . That means they don’t like water, and are actually repelled by water molecules. On the flip side, CBD and THC are both fat-soluble . They like to bind with fatty acid molecules – such as those found in oil. When cannabis is steeped in oil, the THC and CBD molecules leave the buds or plant material and become one with the oil instead.

A wide variety of oils can be used to make cannabis oil. However, coconut oil and olive oil are the most popular and common. Coconut oil and olive oil are both pleasant-tasting and very nourishing for skin, making them versatile options for either medicated edibles or topical applications. Plus, they both have strong natural antifungal and antimicrobial properties. This helps prevent mold and extends the shelf life of your cannabis oil. Coconut oil is higher in saturated fat, which may bind fat-loving cannabinoids even more readily than olive oil.

Follow along with these step-by-step instructions to learn how to make homemade cannabis oil. We’ll also briefly discuss the science behind cannabis oil, and what types of cannabis to use to make oil. Finally, we’ll go over various ways to use homemade cannabis oil, including some notes about caution and dosing with edibles.

What is Cannabis-Infused Oil.

Yet when it comes to heating cannabis, it is best to do so low, slow, and methodically . There are time and temperature “sweet spots” where raw THCA and CBDA are converted into active THC and CBD. But without a precise process, over-heating or under-heating cannabis can lead to uneven activation of THC and CBD. Even worse, it may even destroy the THC or CBD altogether!

The cannabinoid compounds found in raw cannabis (THCA and CBDA) are not the same as those found in cannabis that has been heated – such as those inhaled (THC and CBD) when you ignite or vaporize cannabis, or when cooking with cannabis. The process of heating and “activating” cannabis is called decarboxylation . It is what makes cannabis psychoactive, and also more potent for medicinal applications.

Therefore, our cannabis oil recipe calls for decarboxylated cannabis as well. I provide very brief instructions on how to decarb raw cannabis below, but you can read further information about exactly how and why to decarb cannabis in the oven in this article.

Your choice! You can make cannabis-infused oil with hemp or marijuana , depending on what is legal and available in your area. Or, what you’re desired end-results are. Hemp oil will only contain CBD (or a very minuscule amount of THC), while marijuana-infused oil will likely contain both THC and CBD. The ratio and concentration of THC and/or CBD depends on the strain of marijuana and particular plant it came from.

I personally like to use strains that are high in both THC and CBD to make oil and salves. To learn more about the differences between strains, CBD and THC, see this article: “Sativa, Indica & Autoflowers, the Differences Explained” .

On the other hand, simply chopping up weed to add to your brownie mix is not a good idea, for many reasons. As we already explored, cannabinoids are fat-soluble. That means that they not only bind with oils during the infusion process, but also that cannabinoids are more readily absorbed and digested in our bodies when they’re consumed with fat – such as oil . If you add raw cannabis to baked goods, it is less likely that the cannabinoids will bind to fats for a consistent and effective edible experience. Using decarboxylated cannabis to make cannabis oil further increases precision and consistency.

Hemp Oil, CBD Oil, THC, or…

Furthermore, making cannabis oil is one of the most reliable ways to create medicated edible cannabis products . Even so, it is extremely difficult to determine the exact potency of homemade edibles or cannabis oil. Because of this, it is suggested to consume with caution in very small doses at first. Cannabis oil can be consumed on its own, or added to other edible cannabis recipes.

Generally speaking, THC is psychoactive and CBD is not . But THC does a lot more than change your state of mind! Studies show that THC has even stronger pain and stress-relieving properties than CBD, which is known to help with insomnia, seizures and inflammation. While they each have notable and distinct stand-alone benefits, an oil or salve containing both CBD and THC has the highest potential for a wide array of health benefits (albeit illegal in some places). Known as the “entourage effect”, the synergistic combination of both THC and CBD through whole-plant cannabis consumption and extracts is more powerful than either one on its own.

Cannabis oil is the foundation ingredient for ultra-healing homemade topical lotions, ointments, and salves – my favorite way to use it! Both THC and CBD have excellent anti-inflammatory, antimicrobial, and antioxidant properties. Studies have shown that cannabinoids have the ability to reduce acne, fine lines and wrinkles, soothe redness and irritation, and balance natural skin oils. Also, cannabinoids (THC especially) are analgesic – meaning they reduce pain. I regularly use our homemade cannabis salve on my knees, ankles, and other aching or inflamed joints and muscles.

Most cannabis oil recipes call for cannabis that has already been properly decarboxylated first. The most common and fuss-free way is to decarb cannabis in the oven, and then add it to oil over a very low heat afterwards – avoiding further decarboxylation. Some folks choose to decarb their raw cannabis on the stovetop simultaneously with the oil infusion process. However, that requires significantly more careful monitoring to hit that time-temperature sweet spot (and not ruin it).

Why Make Cannabis Oil.

Are you interested in making your own cannabis-infused oil? I don’t blame you! Making homemade cannabis oil is a great way to create a highly healing, concentrated, and versatile cannabis product. It is ready to use in edible recipes, topical salves, or even enjoy straight on its own. Especially if you use organic homegrown cannabis like we do, this is an excellent way to use up any extra or “fluffy” stuff too. It also happens to be very easy to make cannabis oil at home!

1 cup of loosely ground decarboxylated cannabis. To be more precise, I suggest to use a kitchen scale to weigh out approximately 7 to 10 grams (a quarter ounce or just over), depending on your tolerance.